The Sony ECM-674/9X Shotgun Microphone provides professional level signal reproduction while remaining cost effective. The ECM-674/9X's compact size, audio character and sensitivity result in the level of performance suitable for use with professional and semi-professional video cameras.
The ECM-674/9X features a supercardioid polar pattern for excellent directivity and minimal noise at the off-axis sections of the capsule. The result is a detailed, audible signal while used in noisy environments. The microphone provides a wide, flat frequency response which results in smooth, accurate signal reproduction with crisp detail and no added coloration. The ECM-674/9X is powered with an internal AA-size battery or external 48-volt phantom power.
The ECM-674/9X's size and sound quality make it an excellent choice for event video shoots, film, documentary shooting, court room depositions, etc.
- Battery or Phantom Power
- The ECM-674/9X is capable of powering via AA size internal battery or external 48 Volt phantom power.
- Supercardioid Polar Pattern
- The supercardioid polar pattern is effective in minimizing noise and ambient audio at the off-axis sections of the microphone capsule.
- Low Frequency Roll-Off Switch
- The 2-position low frequency roll-off switch minimizes low frequency rumble and noise due to wind, proximity effect, ambiance, etc.
- Compact Design
- The ECM-674/9X features a low-profile and light weight construction. The compact design is suitable for mounting on smaller cameras without obstructing the view.
Product Highlights
- Supercardioid Polar Pattern
- Battery or Phantom Power
- 3-pin XLR Output
- Includes Windscreen and Spacer
- Fits HDV, DVCAM, XDCAM Camcorders
- Sony ECM-674 Electret Condenser Microphone
- Operational instructions
- Microphone cable
- Microphone spacer
- Microphone holder
- Windscreen
| Transducer |
Electret Condenser |
| Polar Pattern |
Supercardioid |
| Frequency Response |
40Hz to 20kHz |
| Dynamic Range (Typical) |
Phantom: 107dB or more |
| |
Battery: 98dB or more |
| Signal-to-Noise Ratio |
77dB or more (IEC179 A-weighted, 1 kHz, 1Pa.) |
| Maximum Input Sound Level |
Phantom: 124dB SPL, |
| |
Battery: 115dB SPL |
| Power Requirements |
External: DC 40 to 52V, Battery: 1.5V |
| Output Impedance |
(@ 1kHz) |
| |
200 ohms +/- 20% |
| Output Connectors |
3-pin XLR male |
| Pad |
No |
| Low Frequency Roll-Off |
Yes |
| Dimensions |
10.55 x 0.78" (268 x 20mm) (Length x Diameter) |
| Weight |
6.5 oz (without battery) |
| |
7.3 oz (with battery) |
